BritishV8 Forum

General Category => MG Sports Cars => Topic started by: alproc on April 18, 2013, 08:31:14 AM

Title: advanced autowire harness install
Post by: alproc on April 18, 2013, 08:31:14 AM
I'm Installing a advanced auto wire harness.I have a new Moss motors turn signal switch and I'm using the supplied autowire connectors. Here's the problem. Out of the turn signal/dimmer/horn sub harness is a black wire that's not shown on the schematic. Is it safe to assume that it a ground wire.
Title: Re: advanced autowire harness install
Post by: restorejag on April 18, 2013, 06:56:00 PM
Alan,
That is the ground wire for the horn.
Mike
Title: Re: advanced autowire harness install
Post by: alproc on April 20, 2013, 09:09:30 PM
Mike, thanks for the advice.