Print Page - Stainless MGR style V8 headers

Title: Stainless MGR style V8 headers
Post by: crashbash on April 03, 2013, 04:23:43 PM

For sale
Never used from D&D stainless RV8 style headers, Righ side crosses over into 2 in 1. Single exhaust out back. Beautiful welds. Fits 215, 3.5L +++ just not the Buick 300 head exhaust ports.

$800.00 plus shipping located St.Louis/St.Charles, Missouri.
RV8Exhaust.jpg

Title: Re: Stainless MGR style V8 headers
Post by: t-100 on April 05, 2013, 06:17:51 AM

David, I ran the british S/S 215/3.5/3.9/4.2 headers on my 4.8 rover with the Buick 300 crank & heads. The botton of the port is cut off by 5/16 of an inch. The exhaust gasses go to the TOP of the port & a very small amount of gasses are at the bottom of the port. Ran my 4.8 Rover Buick for over 100,000 miles with the british headers. Very good set of headers, by the way.

Title: Re: Stainless MGR style V8 headers
Post by: crashbash on April 12, 2013, 08:12:30 AM

I will pay shipping costs in North America dave

Title: Re: Stainless MGR style V8 headers
Post by: BriansMGBV8 on April 15, 2013, 02:11:49 PM

Are these headers still available?

Title: Re: Stainless MGR style V8 headers
Post by: crashbash on April 15, 2013, 03:05:00 PM

yes send pm

Title: Re: Stainless MGR style V8 headers
Post by: crashbash on April 16, 2013, 03:45:08 PM

These have been sold....will make a contribution thanks

BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: crashbash on April 03, 2013, 04:23:43 PM