BritishV8 Forum

General Category => MG Sports Cars => Topic started by: nobogez07 on February 28, 2013, 03:16:35 PM

Title: Direct Fire Ignition & the Ford 5.0 L
Post by: nobogez07 on February 28, 2013, 03:16:35 PM
Though I've viewed DFI in a number of other 5.0L swaps I haven't seen one yet on a B swap.

Two primary reasons for entertaining this approach. 1. I don't have to deal with a dizzy the really is in the wrong place.  2. it makes hood clearance less an issue due to routing of the intake.

Has anyone seen any other performance type gains from there use?
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: classic conversions on February 28, 2013, 10:15:40 PM
Accurate timing is essential and it does improve performance. I have been toying with the idea of selling the plug with a drive for the oil pump for the Ford 302.
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: nobogez07 on March 01, 2013, 08:08:10 AM
Bill
You are very correct in that there needs to be a distributor driver to operate the oil pump.  I have the Electomotive DFI system and would be happy to work with you on it.  I had planned to cut a stock Ford distributor (with a steel gear) and locate it in such a way that it would drive the oil pump shaft.

I'm sure exactly if that would work but that was the direction I was going to pursue.  PM me to discuss.
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: BlownMGB-V8 on March 01, 2013, 09:20:21 AM
You mean something like this?

MVC-185F.JPG

Jim
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: nobogez07 on March 01, 2013, 10:03:02 AM
Very similar!!  that's the part of DFI I wish there were a better answer for!

The long and the short of it is pretty much what you've displayed!  I'd be happy to do some testing if you're interested in marketing the idea/
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: BlownMGB-V8 on March 01, 2013, 10:17:27 AM
Not really Doug, that is just the drive for my 340. Too many other things on my plate. Feel free to use it. The sensor is a late Ford part.

Jim
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: nobogez07 on March 02, 2013, 09:32:27 AM
Hey Jim

That's a great offer and I'd like to take you up on that but I'd like to offer something to you for your efforts!

If you need some pieces powdercoated any time in the future, let me know and I'll get them done no cost to you!

Thanks again for the offer!!!  That really does save me a lot of testing work!

Doug
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: MGB-FV8 on March 02, 2013, 09:42:37 PM
Doug, just go to a salvage yard and get the plug you need from a late model (1996-2001) Ford Explorer 5.0 Liter (302).  The Explorer improved to the DIS system starting in 1996 and the distributor was replaced with a camshaft sensor via a modified distributor base; it's very short.  Just what you need.
http://static.summitracing.com/global/images/prod/large/rnb-689-103_w.jpg
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: WernerVC on March 02, 2013, 11:12:12 PM
I am working on something similar for my Rover V8 engine. It uses the EDIS ignition system from Ford and a crankshaft toothed wheel with sensor. The dizzy is replaced with a cut off dizzy and an aluminum plug on the top.
Parts are available in the UK.
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: BlownMGB-V8 on March 03, 2013, 12:23:58 AM
Yeah, that's what mine is and I found the Ford Cam sensor/cap to top it off. The upgrade to MS-III will require the cam sensor.

Jim

MVC-184F.JPG
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: MGB-FV8 on March 03, 2013, 12:39:15 AM
Jim, what application is yours? It looks like a GM fit as it doesn't have the extension for the oil pump drive shaft a Ford requires like in the photo I've posted a link  on.http://static.summitracing.com/global/images/prod/large/rnb-689-103_w.jpg
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: BlownMGB-V8 on March 03, 2013, 12:53:10 AM
BOPR/SBB
(340 actually, could be BBB with a different gear.)
If you notice, it has two blades, one steel and one brass for balanced loading on the thrust washer below and balanced weight.

Jim
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: MGB-FV8 on March 03, 2013, 01:00:43 AM
I can't help but ask; did you machine this?  That looks like a fine engineered piece.....
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: BlownMGB-V8 on March 03, 2013, 01:10:49 AM
Thank You Jacques, and of course you are correct. I doubt anyone sells these.

Jim
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: mgbreis on March 04, 2013, 09:30:14 AM
Doug, I'm curious what intake you're planning on using?
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: burner1 on March 04, 2013, 11:05:25 AM
I use the XDI on my 400. I cut down a distributor and made a cap to drive the oil pump. My brother uses them on his GMC V12's and other engines including a Continental 1790ci tnk engine. We just laser cut a toothed wheel for the front. Easyt o set up.


http://www.electromotive-inc.com/products/xdi.php


(http://www.rc-tech.net/cars2/panttransam/cc.jpg)
Title: Re: Direct Fire Ignition & the Ford 5.0 L
Post by: nobogez07 on March 09, 2013, 10:17:54 AM
Ryan

I'm using the Edelbrock Performer in conjunction with Edelbrock's Pro Flo 2 injection system.