Text only | Text with Images

BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: mgbuick on February 03, 2013, 12:29:16 AM

Title: BUICK 300
Post by: mgbuick on February 03, 2013, 12:29:16 AM
I  have a clean 1964 buick 300 on a stand with good aluminum heads and manifold. I would take offers. I have a 1975  mgb with a buick 300 and it has  lots of power.
Title: Re: BUICK 300
Post by: Phillip G on February 26, 2013, 01:43:28 PM
Steve,

What would you need for just the 2 cylinder heads from your 1964 Buick 300 ?

phil leonard
Title: Re: BUICK 300
Post by: Dan Jones on February 27, 2013, 03:26:03 PM
> What would you need for just the 2 cylinder heads from your 1964 Buick 300 ?

Hey Phil,

I've got several spare sets of aluminum Buick 300 heads.  I'll snap some
pictures if you'd like.  I'm located near St. Louis so shipping shouldn't
be too bad to KC.

Dan Jones
Title: Re: BUICK 300
Post by: roverman on February 28, 2013, 09:22:17 PM
Phil and clan, If you're not going to run a Merlin or TA head, this is the next best one. Iron 300/340 heads are "pitiful" on exhaust flow.  Good Luck, roverman.
Title: Re: BUICK 300
Post by: Blown v8 on March 10, 2013, 05:16:59 PM
Have you any inlet manifolds for the 300 ?
Any pics ?
Title: Re: BUICK 300
Post by: Dan Jones on March 11, 2013, 12:04:27 AM
I do have a very nice 1964 Buick 300 aluminum 4 barrel intake.   I'll try to get some pictyres this weekend.  PM me a reminder.  

Dan
Text only | Text with Images