Text only | Text with Images

BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: Wotland on December 29, 2012, 10:43:20 AM

Title: WTB narrowed 5.7" chevy rods for Buick 215
Post by: Wotland on December 29, 2012, 10:43:20 AM
Hello,

don't know if someone has a set of narrowed 5.7" SBC rods to suit Buick 215 crank for sale ?

Thanks
Title: Re: WTB narrowed 5.7" chevy rods for Buick 215
Post by: WedgeWorks1 on December 29, 2012, 07:47:31 PM
I may have a set?
Title: Re: WTB narrowed 5.7" chevy rods for Buick 215
Post by: roverman on January 02, 2013, 12:29:47 PM
Wot, so many good aftermarket rods are available now, I would consider using them. All one needs is a lathe, with a 3 or 6 jaw chuck. This allows you to "exactly" control your desired rod side clearance, and center the rod, in the bore. Onward, roverman.
Text only | Text with Images