Print Page - brake pressure switch activated while bleeding brakes

Title: brake pressure switch activated while bleeding brakes
Post by: harv8 on October 13, 2012, 01:48:54 PM

I was bleeding my new brake system today when I apparantly activated the brake pressure differential switch. Fluid went low in the reservoir :-( ...........so now I cannot pump any fluid through the rear brake lines!!!! Did I activiate the pressure differential switch that blocks fluid to the rear brakes? How do i reset the system. I have the 1974.5 non-servo system that has the switch on the distribution block on the driver's inner fender.

Thanks for any help!

Cheers,
Martyn

Title: Re: brake pressure switch activated while bleeding brakes
Post by: harv8 on October 14, 2012, 04:56:43 PM

All figured out..........and now I understand another MG idiosynchrosy. On to the next challenge!

Title: Re: brake pressure switch activated while bleeding brakes
Post by: madmax on October 21, 2012, 05:16:06 PM

HAHA

Just found THIS link! I responded similarly to your Other Thread. :-)

Cheers,

M

BritishV8 Forum

General Category => MG Sports Cars => Topic started by: harv8 on October 13, 2012, 01:48:54 PM