General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: Ed_K on October 11, 2012, 08:50:23 AM
Title: Any experience of the crower 50233 or Kent H224 in an RV8?
Post by: Ed_K on October 11, 2012, 08:50:23 AM
Hi guys, looking for any advice or experience with the above two cams. The engine is a 3.9 rover with stage 3 heads and a Kent H214, it made 248hp on this setup, dyno sheer here: http://goo.gl/Ea8Q1