Text only | Text with Images

BritishV8 Forum

General Category => MG Sports Cars => Topic started by: Tom Lea on September 18, 2012, 12:20:48 PM

Title: Clutch disc compatibility
Post by: Tom Lea on September 18, 2012, 12:20:48 PM
Help:  Have a '94 Camaro 3.4L and an S-10 bell housing.  Have a WC T-5 from an 89 Camaro. Have a clutch disc/pressure plate/flywheel from an S-10 but having compatibility problems.
The input shaft on the T-5 is right at 1 1/8" with 26 splines.  The clutch disc is 9 3/4" dia with about a 1" center hole and 14 splines.  I NEED a clutch disc with the 1" hole and 26 splines. Is there a clutch disc I can get to replace the one I have and make this simple.

Thanks

Tom
Title: Re: Clutch disc compatibility
Post by: Tom Lea on September 18, 2012, 12:21:52 PM
Sorry: double post
Title: Re: Clutch disc compatibility
Post by: mgb260 on September 18, 2012, 12:34:18 PM
I believe you want a 2.2  4 cylinder S-10 disk. 9 1/4" dia., 1 1/8" input,26 spline.
Text only | Text with Images