Text only | Text with Images

BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: roverman on June 26, 2012, 01:49:57 PM

Title: Wanted: oem. 4.6L Rover cam
Post by: roverman on June 26, 2012, 01:49:57 PM
Good, used # 2629,(#cast into body). Less than 020" lobe wear, suitable for re-grind.  Thanks, roverman.
Title: Re: Wanted: oem. 4.6L Rover cam
Post by: V8WEDG on June 30, 2012, 08:11:43 PM
roverman,

Are you still looking for one of these?

I have one but I don't know what the factory specs are for the lobes or what part(s) of the lobe to measure (since it's not round)

I'd be happy to measure it if someone can tell me the factory specs and what part(s) to measure.

-Robert
Title: Re: Wanted: oem. 4.6L Rover cam
Post by: roverman on July 02, 2012, 11:26:08 AM
Robert, #2629 is cast between the lobes, front to rear.Measuring calipers over heel/nose of lobes will reveal amount of nose wear. How much $ ? Thanks, roverman.
Title: Re: Wanted: oem. 4.6L Rover cam
Post by: V8WEDG on July 02, 2012, 09:12:58 PM
Roverman,
Yes, it is a #2629 cam.
I still need the factory specs to compare the cam measurements to.
I'll message you about the shipping.
Title: Re: Wanted: oem. 4.6L Rover cam
Post by: V8WEDG on July 02, 2012, 09:16:53 PM
I meant to say I'll message you about the price and shipping.
Text only | Text with Images