BritishV8 Forum

General Category => MG Sports Cars => Topic started by: deltron63 on June 04, 2012, 02:58:45 PM

Title: finished
Post by: deltron63 on June 04, 2012, 02:58:45 PM
Well, after a year and a half's hard work the MGB GT V8 is finally finished.
MOT next saturday then it's on the road
done1.JPG
done2.JPG
done3.JPG
Title: Re: finished
Post by: HealeyRick on June 04, 2012, 03:25:44 PM
Congratulations, Tony.  She looks beautiful.
Title: Re: finished
Post by: deltadave on June 04, 2012, 03:28:05 PM
good  job, now enjoy it!
Title: Re: finished
Post by: Moderator on June 04, 2012, 04:43:44 PM
Wow - I've never seen a better looking small block Chevy!

;o)


I have a pretty good idea "how it was done" - but I still hope you'll soon submit a <a href="http://www.britishv8.org/British-V8-How-To-Contribute.htm">How It Was Done</a> article.
Title: Re: finished
Post by: deltron63 on June 04, 2012, 05:39:49 PM
Hi Curtis, It's not a chevy, It's a good old rover 3.5 v8 with a few " extra" bits
 ; )
Title: Re: finished
Post by: Moderator on June 04, 2012, 05:44:11 PM
Orange engine paint, chrome valve covers, spark plug wires routed to behind air cleaner... you can't fool me!
Title: Re: finished
Post by: deltron63 on June 04, 2012, 05:46:10 PM
Here's a clue
P1020423Medium.JPG
Title: Re: finished
Post by: rficalora on June 04, 2012, 06:02:47 PM
What's the purpose of the distributor then?
Title: Re: finished
Post by: deltron63 on June 04, 2012, 06:07:02 PM
To drive the oil pump
Title: Re: finished
Post by: rficalora on June 04, 2012, 06:41:14 PM
Ok, makes sense.  Should have thought of that myself!
Title: Re: finished
Post by: mgb260 on June 04, 2012, 11:29:30 PM
Yeah, You can get Chevy or Ford valve cover adapters for the Buick/Rover. There was a guy selling them on EBay. Nice looking car Tony but, you know you're never really finished,LOL.
Title: Re: finished
Post by: NCtim on June 07, 2012, 05:39:51 PM
Love the dash. Good job, now get to lowering it!

Cheers,
NCtim
Title: Re: finished
Post by: John316m on July 20, 2012, 02:42:34 PM
Hi,
Have you used billet pullies on the water pump (and crank), if so did you get them here in the UK
John