BritishV8 Forum

General Category => MG Sports Cars => Topic started by: MGA JIM on March 10, 2012, 09:50:02 PM

Title: 3.4 crate engine with iron heads valve seals
Post by: MGA JIM on March 10, 2012, 09:50:02 PM
Gentlemen,
I have a MGA with a 3.4 crate engine that I would like to add valve seals to. And while I was in there I was thinking about adding a set of 1.6 roller rockers. Has anyone done this to this engine with favorable results? Thanks!
Title: Re: 3.4 crate engine with iron heads valve seals
Post by: mgb260 on March 11, 2012, 11:08:09 AM
PM sent, Jim. I've had good luck with the blue Viton Perfect Circle type seals.
Title: Re: 3.4 crate engine with iron heads valve seals
Post by: BMC on March 25, 2012, 02:48:58 AM
It's like doing it on anything else. A little pressure to the cylinders and break the hold that the valve retainers have.

A set of 1.6 ratio roller rockers should work even with a SFI motor.

-BMC.