BritishV8 Forum

General Category => MG Sports Cars => Topic started by: 70splitterb on February 04, 2012, 12:23:58 PM

Title: 302 in a 70 split bumper
Post by: 70splitterb on February 04, 2012, 12:23:58 PM
hey guys, i am new to this site and new to the mg world. i am now the proud owner of a 1970 mgb split bumper. i was planning on converting it to v8, but cannot seem to find much info on the ford 302 conversion in a chrome bumper car. any info will greatly help. thanks!!!
Title: Re: 302 in a 70 split bumper
Post by: MGB-FV8 on February 04, 2012, 02:18:48 PM
Welcome Josh, take a few minutes and look at the MG in the Photo Galleries" tab; you'll see plenty of 302 (5.0L) MG conversions and their details.
Title: Re: 302 in a 70 split bumper
Post by: 70splitterb on February 04, 2012, 03:14:01 PM
i looked over most conversions on chrome bumper cars, but noone really tells me where i can get the kit, firewall mods etc.  i got some great ideas for my splitter from peoples cars, now i just need a few websites i can visit to get my mounts, crossmember and other items. thanks guys.
Title: Re: 302 in a 70 split bumper
Post by: mgb260 on February 04, 2012, 03:57:04 PM
Even though Geoff"s car is rubber bumper he cut the firewall back like you would need to do with the chrome bumper. Shows steering also. Lots of info in Martyn Harvey's project page including crossmember and motor mount mods.

http://forum.britishv8.org/read.php?13,20349

http://forum.britishv8.org/read.php?13,6428
Title: Re: 302 in a 70 split bumper
Post by: Moderator on February 04, 2012, 04:19:52 PM
Welcome to the site, Josh. You'll soon find your way around, and realize we've got TONS of information on this subject.

If this very page isn't showing a banner advertisement for Mantell Motorsport at the moment, simply click the "reload" button in your browser toolbar until it does!  Pete sells a kit for putting the Ford 302 into a later model MGB - but he'll also be able to help you with your '70 - and the banner ad will provide you with both his phone number and e-mail address. Please tell Pete you saw his ad here! Alternatively, you can find Pete's ad on our home page or in our vendor directory. Look for the vendor directory under the "contacts" pulldown menu above...

Using the search box immediately above the contacts menu (in the header of this page), you can access many articles about specific aspects of the 302 / MGB swap. The search box will also help you find old message board posts that are relevant to your query. Here are two good links to start with:
http://www.britishv8.org/Articles/MGB-Ford-302-Conversion.htm
http://forum.britishv8.org/read.php?2,15062
Title: Re: 302 in a 70 split bumper
Post by: kerbau53 on February 05, 2012, 03:19:03 AM
Josh,

I used Rob Ficalora's and Dan Masters project pics extensively. Look at all the pics you can find! Then keep looking at them. Rob Martin (actual builder) and I have had relatively few issues by doing as much prior planning as possible.
Title: Re: 302 in a 70 split bumper
Post by: MGB-FV8 on February 06, 2012, 12:51:08 PM
Jim, your links shine the spotlight on nice projects; these two will be "eye candy" once finished..........

Jacques