BritishV8 Forum

General Category => MG Sports Cars => Topic started by: mgbv81970 on September 10, 2011, 11:12:02 AM

Title: ADVANCE AUTO WIRING HELP
Post by: mgbv81970 on September 10, 2011, 11:12:02 AM
I'm in the middle of installing an Advance Auto Wire harness in my car.  I have a question regarding the windshield wiper harness.  On the Advance schematic it's showing the green wire (ignition hot) going to both the green wire on the wiper switch as well as the BLACK wire on the wiper switch.  The Bentley manual shows the black wire being grounded.  I'm confused.  Anyone install one of these recently that can help me out here?  

Thanks,

Scott
Title: Re: ADVANCE AUTO WIRING HELP
Post by: ex-tyke on September 10, 2011, 12:16:50 PM
There is an on-line standard wiring schematic for a 1970 MGB on the Advance Auto Wire web site.
http://www.advanceautowire.com/
.....and Steve at AAW is available for tech help anytime....give him a call.
Title: Re: ADVANCE AUTO WIRING HELP
Post by: rficalora on September 11, 2011, 12:24:30 AM
Scott, if I recall, the wiper motor gets a hot wire that's not switched.  Then, it gets a ground & a second ground that's switched.  The switch completes the circuit; motor runs.  Turn switch off & the other ground completes the circuit for the wipers to park.  Don't have the diagrams in front of me so going off memory & can't quote the colors but that's what I recall from the diagrams on the advance auto wire web site.