Text only | Text with Images

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: Moderator on July 16, 2011, 04:52:48 AM

Title: can you i.d. this axle housing?
Post by: Moderator on July 16, 2011, 04:52:48 AM
I don't recognize this axle housing... and wondered if any of you guys can I.D. it:
(http://www.britishracecar.com/TerryBuffum-Jaguar-ParkinsonSpecial/TerryBuffum-Jaguar-ParkinsonSpecial-DA.jpg)

It's installed on a 1950ish Jag XK-120 Special, but I don't believe it's original to the car.
Title: Re: can you i.d. this axle housing?
Post by: WedgeWorks1 on July 16, 2011, 09:19:31 AM
Look up Salibsbury 2Ha housing. They were found in early jags and had perfromance parts offered.
Title: Re: can you i.d. this axle housing?
Post by: Moderator on July 17, 2011, 02:26:13 PM
Thank you! Exactly what I needed, and your tip (2Ha) gave me the right Google search term to find a bunch more.
Title: Re: can you i.d. this axle housing?
Post by: WedgeWorks1 on July 17, 2011, 09:17:48 PM
The upgrade is a Salisbury 4Ha, 7Ha and even a 8Ha? These are all English Built Dana rear axles. I know the Salisbury 4Ha is a Dana 44. The others I dont know but the 2Ha could be the 20 or 35 Dana? Good Luck!
Title: Re: can you i.d. this axle housing?
Post by: mgb260 on July 17, 2011, 09:54:47 PM
Looks a little more rounded than Dana 25,27 or 30 which all use the same cover. That doesn't mean the internals aren't the same. Here is a picture of the American Dana 25,27 or 30 cover:
702.jpg
Text only | Text with Images