Print Page - rover EFI into tr7

Title: rover EFI into tr7
Post by: en on July 13, 2011, 08:27:57 PM

I did a search here but didn't see an answer
I have a '92 rover system i'm putting into a tr7
What re my options for oil pressure and coolant temp gages?
The sensors on the engine are BSP?
What have others done with this?
thank you

Title: Re: rover EFI into tr7
Post by: WedgeWorks1 on July 13, 2011, 08:50:12 PM

You would be surprized but the TR7 and TR8 temp sender and gauge are the same. You can find a port on the Rover EFI intake to put the sender in. The oil pressure on a TR7 is only a warning light and also on a rover timing cover there are enough ports for you to use a single prong oil pressure swith in the stock TR7 harness. Other sensors such as cold start, temp, etc you will need to have the whole harness or go with an aftermarket EFI control system.

Title: Re: rover EFI into tr7
Post by: en on July 14, 2011, 08:27:05 PM

My temp gage is defective. Does anyone sell a replacement?

Title: Re: rover EFI into tr7
Post by: WedgeWorks1 on July 15, 2011, 09:02:09 AM

Is it a TR7 one? I have about 3 of them used............ message me.

Title: Re: rover EFI into tr7
Post by: real_old_guy on July 22, 2011, 10:41:27 PM

Oil Pressure gauge:

http://web.me.com/jclaythompson/Technical/Oil_Pressure_Gauge.html

BritishV8 Forum

General Category => Triumph Sports Cars => Topic started by: en on July 13, 2011, 08:27:57 PM