BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: dynodave on June 20, 2011, 03:47:55 PM

Title: 94 to 97 3.9/4.2 camshaft thrust plate
Post by: dynodave on June 20, 2011, 03:47:55 PM
I would appreciate information on the demensions of the machined step in the camshaft thrust flange for the 94 to 97 3.9/4.2, sometimes referred to as the "interim" motor. The demensions I need are: 1. Diameter of the step that the thrust plate fits over.
2. The thickness of the thrust flange ( from the rear facing thrust surface to the front facing thrust surface )

I appreciate any help the membership can provide

David
cam-thrust-plate.jpg
key1.jpg