I have a few parts for sale to try to raise some funds to finish my V8 conversion. Price does not include shipping which will be the actual cost.
MGB specific parts:
Mintex brake pads. I tried these out and found they squealed like crazy with my brakes. I bevelled the edge before switching to regular pads. They are essentially new. Maybe you will have better luck with them: $30
(http://i697.photobucket.com/albums/vv335/cgill/Brakepads1.jpg)
(http://i697.photobucket.com/albums/vv335/cgill/Brakepads.jpg)
1974 turn signal and wiper switch. These are in good shape except the DPO cut a couple of wires. I have no idea why: $30 for both.
(http://i697.photobucket.com/albums/vv335/cgill/1974turnsignalandwiperswitch1.jpg)
(http://i697.photobucket.com/albums/vv335/cgill/1974turnsignalandwiperswitch.jpg)
1974 steering column (ignition not included). Threads need to be re-tapped due to a DPO but they aren't bad: $50
(http://i697.photobucket.com/albums/vv335/cgill/MG%20parts%20for%20sale/IMG_1615.jpg)
(http://i697.photobucket.com/albums/vv335/cgill/MG%20parts%20for%20sale/IMG_1617.jpg)
Antenna. As you can see from the photos the gray part is scuffed up a bit. $10
(http://i697.photobucket.com/albums/vv335/cgill/MG%20parts%20for%20sale/IMG_1612.jpg)
(http://i697.photobucket.com/albums/vv335/cgill/MG%20parts%20for%20sale/IMG_1613.jpg)
Hood prop: $10
(http://i697.photobucket.com/albums/vv335/cgill/MG%20parts%20for%20sale/IMG_1610.jpg)
Rubber bumper steering wheel. No cracks, just dirty! $20
(http://i697.photobucket.com/albums/vv335/cgill/MG%20parts%20for%20sale/IMG_1614.jpg)
Shock cores for rebuilds – some may be fine to use as is but I can't guarantee they won't leak. $10 each
(http://i697.photobucket.com/albums/vv335/cgill/Shockcores.jpg)
MGB fan switch – the little white fan logo is rubbed off and I painted the chrome bezel. Not perfect but good enough for those that need glasses to see!: $10
(http://i697.photobucket.com/albums/vv335/cgill/Fanswitch.jpg)
Motolita hub adapter for 1974 steering column. I don't know what other years it will fit but it came off a 1974: $40
(http://i697.photobucket.com/albums/vv335/cgill/motolitahornadapterfor1974steeringcolumn1.jpg)
(http://i697.photobucket.com/albums/vv335/cgill/motolitahornadapterfor1974steeringcolumn.jpg)
GM/Rover 3.5 V8 parts:
V8 emblem (in great shape). I have two but the second one has a scratch on it - $5 each
(http://i697.photobucket.com/albums/vv335/cgill/V8emblem.jpg)
Long nosed water pump pulley: $30
(http://i697.photobucket.com/albums/vv335/cgill/Longnosewaterpumppulley.jpg)
Miscellaneous harmonic dampeners and pulleys: $15 each.
(http://i697.photobucket.com/albums/vv335/cgill/Harmonicdampenersandpulleys1.jpg)
(http://i697.photobucket.com/albums/vv335/cgill/MiscRoverGMpulleys.jpg)
(http://i697.photobucket.com/albums/vv335/cgill/MiscRoverGMpulleys1.jpg)
(http://i697.photobucket.com/albums/vv335/cgill/Harmonicdampenersandpulleys.jpg)
GM 3.5 rockers: $30 for the pair
(http://i697.photobucket.com/albums/vv335/cgill/GMrockers.jpg)
GM push rods: $10
(http://i697.photobucket.com/albums/vv335/cgill/GMpushrods.jpg)
Oil pump (not high volume). Includes springs and other bits and pieces you see in the photo: $20
(http://i697.photobucket.com/albums/vv335/cgill/GMroveroilpumpnothighvolume.jpg)
Timing chain (new). I decided to go with a roller bearing timing chain: $30
(http://i697.photobucket.com/albums/vv335/cgill/GMRovertimingchainnonrollerbearing.jpg)
Rover overflow tank: $30
(http://i697.photobucket.com/albums/vv335/cgill/Roveroverflowtank.jpg)
Bell housing dust plate for a T5 transmission – new. I mistakenly bought it for my project but it doesn't fit. $20
(http://i697.photobucket.com/albums/vv335/cgill/bellhousingdustplate.jpg)
RV8 exhaust gaskets - new: $15
(http://i697.photobucket.com/albums/vv335/cgill/RV8headerexhaustgaskets.jpg)
Sale pending on the motolita hub
I finally found out that dust shield is for a 3.4 v6 mated to the GM T5 housing.