Text only | Text with Images

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: corby1 on January 31, 2011, 11:26:38 PM

Title: LT 77 Trans to a94 rover 4.0
Post by: corby1 on January 31, 2011, 11:26:38 PM
Help I'm going to change out my 3.5 to a 94 Rover 4.0 using the LT77.  Will the LT77 trans input shaft fit in the 4.0 crank? I've heard that the 4.0 crank is longer then the 3.5?(The input shaft goes in to far?) and how would have a bushing 4.0? Thanks
Title: Re: LT 77 Trans to a94 rover 4.0
Post by: roverman on February 01, 2011, 01:50:09 PM
Todd, It is longer-on the front ! This to drive the crank driven oil pump. I know of no extra dim.-out back. roverman.
Text only | Text with Images