Print Page - Crankshaft pilot bearing for standard gearbox input shaft

Title: Crankshaft pilot bearing for standard gearbox input shaft
Post by: en on January 16, 2011, 11:38:37 AM

I just received a pilot bearing for my 3.5. part #549911
The OD of the bearing is correct but the ID is 3/4"
The input shaft on my LT77 is 1/2"
Am i missing t=something?
thank you

Title: Re: Crankshaft pilot bearing for standard gearbox input shaft
Post by: s16034b on December 14, 2014, 09:44:02 PM

I have same issue; how did you solve it?

Title: Re: Crankshaft pilot bearing for standard gearbox input shaft
Post by: tbo on December 16, 2014, 07:52:53 PM

Why not go to some transmission shop and ask them? Mister Transmission or something. I'm trying to find out if I can use Chev Gears in a Ford trans and no body knows so I think I'll go to see my local Transmission guy and just ask him. He;s a nice guy and I can get some parts from him if i need them. sometimes the internet does;nt work as good as your neighbourhood guy

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: en on January 16, 2011, 11:38:37 AM