Text only | Text with Images

BritishV8 Forum

General Category => Classified Ads: Swap Parts Here! => Topic started by: roverman on November 18, 2010, 02:03:28 PM

Title: "Wildcat",Rover /SBB 4 bbl manifold, For Sale
Post by: roverman on November 18, 2010, 02:03:28 PM
New, never bolted on or run. Does NOT fit Merlin heads. No injector bungs.Cost me $450./US. Possible trade for Huffaker manifold. Serious please, roverman.
Title: Re: "Wildcat",Rover /SBB 4 bbl manifold, For Sale
Post by: mbhnm on November 22, 2010, 10:21:19 PM
This is the last pic that I have. I think he has it a little taller now. He's going to weld over the top to extend the flange.

Thanks
Mark
1119001514.jpg
Title: Re: "Wildcat",Rover /SBB 4 bbl manifold, For Sale
Post by: 7sand8s on December 05, 2010, 11:53:35 AM
Is the manifold available?
Thanks
Title: Re: "Wildcat",Rover /SBB 4 bbl manifold, For Sale
Post by: roverman on December 07, 2010, 09:23:54 PM
Dennis, Still available. roverman.
Title: Re: "Wildcat",Rover /SBB 4 bbl manifold, For Sale
Post by: roverman on December 09, 2010, 07:14:40 PM
Update, Floor of port to centerline mounting holes = 1.14". Ports measure 1.935"-2.00" tall x .85"-.95" wide. Overall height is 4.5". Cheers, roverman.
Title: Re: "Wildcat",Rover /SBB 4 bbl manifold, is gone !
Post by: roverman on December 27, 2010, 09:13:44 PM
It's gone. roverman.
Text only | Text with Images