Text only | Text with Images

BritishV8 Forum

General Category => Triumph Sports Cars => Topic started by: 77v8 on October 20, 2010, 12:41:05 AM

Title: Hard to find item. Aluminum flywheel for the rover v8 any one know where to buy?
Post by: 77v8 on October 20, 2010, 12:41:05 AM
I only found one supplier.  tsimportedautomotive thats a mouthful.
Title: Re: Hard to find item. Aluminum flywheel for the rover v8 any one know where to buy?
Post by: WedgeWorks1 on October 20, 2010, 01:00:48 PM
Try The Wedge Shop. D&D might have one too? I hope you dont plan on driving on the street a lot with the aluminumn flywheel.
Title: Re: Hard to find item. Aluminum flywheel for the rover v8 any one know where to buy?
Post by: 77v8 on October 21, 2010, 12:22:09 AM
I do not want an aluminum only type. I want a steel insert type. thanks for the it is appreciated.
Title: Re: Hard to find item. Aluminum flywheel for the rover v8 any one know where to buy?
Post by: john 215 on October 23, 2010, 05:04:55 PM
Hi,

A bit far for you gents but over the muddy ditch-

http://v8tuner.co.uk/product.php?id=445

Not cheap though, even before postage.

cheers John
Title: Re: Hard to find item. Aluminum flywheel for the rover v8 any one know where to buy?
Post by: WedgeWorks1 on October 24, 2010, 05:26:42 PM
As far as I know the aluminum flywheels sold have a steel insert.
Title: Re: Hard to find item. Aluminum flywheel for the rover v8 any one know where to buy?
Post by: roverman on October 24, 2010, 10:37:34 PM
Robert, Be easier if you stated your desired disk dia.? Single/double ? All steel for a double weighs under16 lbs." Fidanza" sells alum/steel flywheels,no Rover, but will sell "replacement"steel inserts, with bolts/nuts. I'm using for a 10.5" disk.Good Luck, roverman.
Title: Re: Hard to find item. Aluminum flywheel for the rover v8 any one know where to buy?
Post by: 77v8 on October 24, 2010, 11:22:49 PM
I dunno guys I think ill stick with my first option at around 400$ U.S. but clutch type. Im not sure yet Ill probably go doubble plate. I have to get the engine macined now anyways. I found helicoils in the block. but my life is on pause for military training untill x-mas.
Text only | Text with Images