Hello,
Anybody have a set of exhaust manifolds and/or a manual trans bellhousing?
Let me know if you do.
Thanks.
I'd give Mark or Dan a call at D&D. Not much call for exhaust manifolds for MGB conversions, so they may be inexpensive. They have also developed an improved bellhousing for the BOPR application.
http://www.aluminumv8.com/index.htm
ex-tyke,
Thanks for the info. I have heard about the D&D offering but right now am exploring my options, so I would like to see if anybody else has a bellhousing they are looking to get rid of.
There is a bell housing and exhaust manifold on EBAY under Buick 215
Mike
I have several sets of TR8/SD1 manifolds, one set of 70 3500S manifolds, one set of LR 4.0 cast manifolds(1997ish vintage), and a set of new MGB V8 shorty headers kicking around here if any of those suit your needs. MGB headers actually belong to a friend, but I have to assume that after 10 years of them being here, they would be for sale. Might be willing to part with a bell housing as well.
Kraig, We might make suggestions for fitment, if you told us what it goes into. For "rear dump" manifolds, the 300/340 Buicks tend to clear better than 215 Buick and Olds. For some cars the 3500 Rover "center dumps" work best. We're here to share, for the common good, roverman.
I have stock 215 manifolds if that is what you are looking for. PM me if interested.