BritishV8 Forum

General Category => Triumph Sports Cars => Topic started by: tr6turbo on August 08, 2010, 05:30:04 PM

Title: Reinventing my TR6
Post by: tr6turbo on August 08, 2010, 05:30:04 PM
I thought I would post some pictures as I make progress on bringing the TR6 back to life.  Before the wreck I was telling Ken Hubert that I was thinking about reinventing the car since it had been on the road for 16 years.  Here are some post wreck photos.
IMG_1323.JPG
IMG_1327.JPG
002.JPG
004.JPG
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 08, 2010, 05:37:34 PM
The body is off of the frame.  I took some photos of my rear suppension since it is a little different then most British V8 projects i have seen.
002.JPG
003.JPG
006.JPG
007.JPG
Title: Re: Reinventing my TR6
Post by: rficalora on August 08, 2010, 09:37:05 PM
What are you going to do about the frame -- repair or replace?
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 09, 2010, 05:19:26 PM
I took a lot of measurements yesterday and it seems that the frame from the firewall back is square and not twisted.  It would take a lot of work to reconstruct the rear suppension structure so I plan on grafting a front frame portion onto my good rear portion.  I feel sure I can do this without lossing any strength.
Title: Re: Reinventing my TR6
Post by: rficalora on August 10, 2010, 12:47:29 AM
Pics of the rear are what caused me to ask.  Inquiring minds want to know you know.  Anything come of the TR6 in Louisiana?
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 10, 2010, 06:07:01 PM
I just now e-mailed him.  I have got a few other prospects undeer investigation.
Title: Re: Reinventing my TR6
Post by: DiDueColpi on August 12, 2010, 10:04:58 PM
Hi Dale,
I'm kinda new here so I didn't know about your accident. What happened and is everyone ok?
I like your rear suspension. Simple and light. How is the ground clearance with the underslung setup?
Have you thought about reinforcing the frame? It must twist and flex like a wet noodle.
With the front end shortened up like that it looks a lot like an old Herald only bigger. If you wanted to be different.........
Cheers
Fred
Title: Re: Reinventing my TR6
Post by: jellison on August 13, 2010, 02:44:59 PM
Ouch - that is a big hit.

What is with the rear of that thing with that awful massive live rear end!!

Nothing wrong with the independant setup even with huge V8 power, just needs the right work.
Title: Re: Reinventing my TR6
Post by: Bill Young on August 13, 2010, 04:16:25 PM
Fred, Dale ran over some spilled coolant at this year's track session at O'Reilly Raceway Park and took a quick turn into the wall. Some details and photos in the coverage at http://forum.britishv8.org/read.php?10,17403
Jon, some keep the IRS. Dale used the 9" Ford, works great for his car especially as he runs it at the drag strip quite a bit. Has really surprised a bunch of V8 cars with his little turbo 4.
Dale, are you thinking tube front frame and new suspension, very light. You could tie in a Fast Cars setup easily and shave a bunch of weight off the front with the glass parts you mentioned.
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 13, 2010, 05:44:30 PM
Bill,  I would like to go with Fast Cars but I an put it back together for a lot less money with the stock stuff.  Bill is right on about the rear end.  I have had to upgrade it to Moser axles because I have twisted stock axles and as you can see in the picture I have also upgraded to the Aluminum Moser center section because I have pushed the bearing caps out the back of a stock axle.
Title: Re: Reinventing my TR6
Post by: rficalora on August 13, 2010, 06:29:22 PM
Dale, give Bill Guzman a call.  He is working on an IFS -- he posted pics either here or on the other V8 site.  Not sure how far along it is, but the pics he posted showed laser cut components tacked & ready to weld to make the crossmember itself so I'm guessing its not too far from being available.  Don't know anything about the geometry, but if it's like everything else he's done, I'm sure it's well sorted out.  If you don't have his number you can get it from his web site www.classicconversionseng.com
Title: Re: Reinventing my TR6
Post by: MGBV8 on August 14, 2010, 12:26:56 PM
I'm betting it's good that the front end absorbed most of the energy, instead of you!

What about that left front wheel, is it still true? Probably not?

Anyway, we all know you can fix it, Dale. See you & the TR6/4Hairdryer in Townsend.  ;D
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 14, 2010, 06:10:21 PM
Carl,   It is amazing but the left front wheel is perfect.  None of the suspension was hurt.  As the frame collapsed the cross member that carries the A-arms moved back along with everything else.  the tire got cut up.
Title: Re: Reinventing my TR6
Post by: socorob on August 15, 2010, 04:29:10 PM
What kind of wheels are those?
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 15, 2010, 05:16:24 PM
16 Inch enki wheels.  They are about 20 years old and as far as I can determine to longer availble.  I was very happy when I saw that my left front wheel was not hurt by the wreck.
Title: Re: Reinventing my TR6
Post by: socorob on August 15, 2010, 09:43:45 PM
i love those. I have 13 inch ones from a Mustang 2 on my Sunbeam that are that look. Im going with larger brakes so now need 15 inchers and cant find those anywhere.
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 21, 2010, 09:49:34 PM
Picture of my doner frame with front panel,  my frame trimed to acept new doner frame and the firewall cleaned up.

003.JPG
007.JPG
005.JPG
Title: Re: Reinventing my TR6
Post by: MGBV8 on August 21, 2010, 10:38:10 PM
Dang, you've been goin' at it!
Title: Re: Reinventing my TR6
Post by: TR6-6SPD on August 22, 2010, 09:27:04 AM
Dale,
Yes, good progress! Gotta get right back on that horse and ride it.

That was strange. There we were, parked next to each other at O'Reilly Raceway Park, before our first driving session. I was asking about your paint color and the conversation extended to how you planned to "reinvent" your car......some day. Well yes, that day came sooner than anyone could have guessed.

Looks like you made a good purchase there with the front clip. Will your reinvented TR6 carry any major changes?
Title: Re: Reinventing my TR6
Post by: rficalora on August 22, 2010, 10:21:40 AM
Yeah Dale, you need to slow down... at this pace you'll be done rebuilding before I'm done building the 1st round!  Great progress, can't wait to see what you do with it.  See you in Townsend.
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 22, 2010, 04:45:41 PM
Ken,  At this point the biggest change will be a full chrome moly roll cage that extends forward to the spring towers.  

There is a ton of work yet to go so I don't see making Townsend but who knows.

dale
Title: Re: Reinventing my TR6
Post by: 74ls1tr6 on August 23, 2010, 09:24:46 AM
Have you seen Jim Prettyleafs half cage. I guess all you would need to do is the front part of the roll cage to finish it off. I rode in this car, it corner's like a flat pancake with no body roll at all.

Jim's link http://www.britishv8.org/Triumph/JimPrettyleaf.htm

JimPrettyleaf-G.jpg
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 23, 2010, 05:38:42 PM
I do like what he did but it does not meet the rules for drag racing.
Title: Re: Reinventing my TR6
Post by: tr6turbo on September 05, 2010, 10:43:15 AM
Getting ready to weld the frame back together.  I pulled strings to get the front suspension mounting points square and on center to the old section of the frame.  One good thing about working with a TR6 frame is that from the fear axle center line to the front of the frame it is flat and all in one plane.  That is why I have the frame up side down.  I used a level to get everything level front to back, side to side and on the diagonals.

001.JPG
002.JPG
Title: Re: Reinventing my TR6
Post by: tr6turbo on September 12, 2010, 09:57:09 AM
These are pictures of my TR6 + 2 fender.  This fender is 2 inches longer then stock.  I am lengthening the wheel base of the car 2 inches.  The piece in front of the fender in the second picture is the 3 inch long piece I cut off.  I then welded back on a 5 inch long piece from my wrecked fender.  I also made a rust repair to the new fender using a piece from my old wrecked fender.
002.JPG
007.JPG
Title: Re: Reinventing my TR6
Post by: tr6turbo on September 19, 2010, 05:11:11 PM
This weekend I got the engine, rear end and all suspension mounted back on the frame for a trial fit.  I now need to make new front fuel lines and brake lines since the car is two inches longer.
003.JPG
006.JPG
009.JPG
Title: Re: Reinventing my TR6
Post by: rficalora on September 19, 2010, 09:25:41 PM
Great progress Dale.
Title: Re: Reinventing my TR6
Post by: alana on September 20, 2010, 06:02:49 AM
Can I ask why 2" longer? It seems like a ton of work for what superficially seems like a very small wheelbase change.
Title: Re: Reinventing my TR6
Post by: 74ls1tr6 on September 20, 2010, 11:04:42 AM
My guess for 2" longer would be for the strip.
Title: Re: Reinventing my TR6
Post by: alana on September 20, 2010, 12:07:04 PM
Well yes, I'd guessed that ;)
My question was more along the lines of "Since it's so much work, why go with ONLY two inches".
Title: Re: Reinventing my TR6
Post by: tr6turbo on September 20, 2010, 04:48:52 PM
The two inches is required to meet the 90 inch min requirement for drag racing.
Title: Re: Reinventing my TR6
Post by: MGBV8 on September 20, 2010, 05:16:44 PM
Since you're going to all that trouble for two inches, ya might as well make it two inches wider on each side, too!  ;)
Title: Re: Reinventing my TR6
Post by: tr6turbo on September 20, 2010, 08:12:09 PM
Carl,   There is alimit as to how much abuse I want to put myself through.  The rules require a minimum wheel base of 90 inches.  I was called on it once.  Making the car 2 inches wider gives you more frontal area which would slow you down.  The other reason for doing it is the challenge and being able to say I did it.  It will be an even more unique car then it was.
Title: Re: Reinventing my TR6
Post by: MGBV8 on September 20, 2010, 08:27:51 PM
Frontal area? Okay, just widen the track width & add flares. Straight line action is a blast, but that is just the in between" stuff.  I'm just trying to look out for you & The Dragon that beckons.  :)
Title: Re: Reinventing my TR6
Post by: alana on September 20, 2010, 08:49:27 PM
You've all seen Len Renkenberger's car, right? He put about 11" and a back seat in it back in the 80s so he could drive the kids around...

(http://6-pack.org/j15/images/phocagallery/trials/2007Trials/thumbs/phoca_thumb_l_IMG_1536.JPG)

(http://6-pack.org/j15/images/phocagallery/trials/2007Trials/thumbs/phoca_thumb_l_IMG_1534.JPG)

(http://6-pack.org/j15/images/phocagallery/trials/2007Trials/thumbs/phoca_thumb_l_IMG_1535.JPG)

These images are from the 2007 TRials in Hershey.
Title: Re: Reinventing my TR6
Post by: MGBV8 on September 21, 2010, 11:20:39 PM
Very sharp. I like it!
Title: Re: Reinventing my TR6
Post by: MGBV8 on October 03, 2010, 08:55:17 PM
How goes it, Dale?
Title: Re: Reinventing my TR6
Post by: tr6turbo on October 04, 2010, 07:43:29 PM
Its ready to go to the race car shop to have the roll cage installed.  It will be getting a 10 point cage.  Four for the basic cage, two side bars for side impact, two going back behind the rear axle and two going forward to the front suppension cross member.  What do you think if I let the fenders off and make a Rat Rod out of it?

003.JPG
004.JPG
006.JPG
008.JPG
Title: Re: Reinventing my TR6
Post by: 74ls1tr6 on October 04, 2010, 08:29:05 PM
"Wow"

Dale you have not wasted any time! I'm impressed at how fast and resourceful you are Dale!

"Awesome"  Rat ummmm, I vote for fenders.
Title: Re: Reinventing my TR6
Post by: MGBV8 on October 04, 2010, 10:45:33 PM
"What do you think if I let the fenders off and make a Rat Rod out of it? "

Yeah, big block Chevy with a blower.....it'd be awesome!    :)
Title: Re: Reinventing my TR6
Post by: rficalora on October 04, 2010, 11:44:08 PM
Time to get all that work done and still mow the grass... don't let my wife see this thread!!
Title: Re: Reinventing my TR6
Post by: tr6turbo on October 05, 2010, 05:09:02 PM
Carl,   It would at least have to be a big block FORD.  No Chevys here.
Title: Re: Reinventing my TR6
Post by: tr6turbo on October 05, 2010, 05:10:30 PM
Rob,  I make my wife mow he grass.
Title: Re: Reinventing my TR6
Post by: tr6turbo on November 28, 2010, 07:44:38 PM
I got the car back from the chassis shop yesterday.  The roll cage turned out well just some details that need to be cleaned up.  Still a lot of work ahead of me.
tr62.jpg
tr63.jpg
tr6004.jpg
tr6005.jpg
Title: Re: Reinventing my TR6
Post by: MGBV8 on November 28, 2010, 10:20:22 PM
Lookin' good, Dale!
Title: Re: Reinventing my TR6
Post by: TR6-6SPD on January 23, 2011, 10:56:02 AM
Hi Dale,
Any updates to share with us?
You do have heat in your garage don't you?
Ken
Title: Re: Reinventing my TR6
Post by: MGBV8 on January 23, 2011, 01:05:39 PM
Ken beat me to it. I was just fixing to ask how it was going with "Stretchhh".    ;-)
Title: Re: Reinventing my TR6
Post by: tr6turbo on January 23, 2011, 02:37:21 PM
I have been working on a lot of detail that does not make much for photos.  Every place the cage passes through the floor and firewall has to be closed up with flashing.  That is complete now.  I painted the portion of the cage that is in the cab.  Put the fuel tank back in.  Started on the firewall getting it ready to paint.  Found a left side fender and lengthened it 2 inches.  Cut my fiberglass hood to get ready to lengthen 2 inches.  Notched out the dash panel to clear the roll cage uprights.

Since I lengthened the car I will not be using the original inner fenders so I need something to support the front valance panel and bumper.  The pictures show the structure I fabricated to do that.  The fenders are supported by the valance panel and the short extension coming forward off of the firewall.  I have designed this so that I can remove the fenders, valance panel, hood, and bumper as one unit by removing a limited number of very accessible fasteners.  Progress has been slow this month but I hope to step it up soon.
DSC00702.JPG
DSC00704.JPG
DSC00707.JPG
DSC00706.JPG
Title: Re: Reinventing my TR6
Post by: TR6-6SPD on January 24, 2011, 06:39:15 AM
Dale,
Good engineering there.
Regarding the cage, did you have to remove the windshield with frame in order the complete the painting of it and what specs tubing was used for that cage? All the same size tubing?
Ken
Title: Re: Reinventing my TR6
Post by: tr6turbo on January 24, 2011, 05:27:17 PM
Ken,   Yes I did remove the windshield frame.  Painting would have been a problem if I didn't.  I used DOM tubing.  I wanted to use chrome moly but it was a lot more money then I realized.  It would have saved about 20 pounds.

dale
Title: Re: Reinventing my TR6
Post by: tr6turbo on February 13, 2011, 04:01:12 PM
More update pictures
DSC00712.JPG
DSC00714.JPG
DSC00715.JPG
DSC00716.JPG
Title: Re: Reinventing my TR6
Post by: rampant racing on February 17, 2011, 11:06:08 PM
looking good ,keep up the great work.
Title: Re: Reinventing my TR6
Post by: kstevusa on February 26, 2011, 12:31:59 PM
"Lookin Good" Dale,   I thought the frame was diamonded by looking at the deck lid fit.  good to know only the front section was hurt.  Guess you were sore for awhile??  Look fwd to seeing you in May!
SAFETY FASTER!
Title: Re: Reinventing my TR6
Post by: rficalora on March 29, 2011, 11:16:09 PM
What's the latest Dale?  Making progress or taking a break?
Title: Re: Reinventing my TR6
Post by: MGBV8 on April 05, 2011, 04:34:43 PM
Yeah, Dale.  It's time for an update on Stretch.  ;)
Title: Re: Reinventing my TR6
Post by: tr6turbo on April 08, 2011, 11:42:04 AM
I have been in China for the last 2 1/2 weeks so not much has happened.  We are making progress though.  Got a lot of the wiring back in and have made all new aluminum interior panels.
Title: Re: Reinventing my TR6
Post by: tr6turbo on June 06, 2011, 06:22:03 PM
Just wanted to show that I am still at it.  The engine and all electrical is in.  I should be able to start it as you see it.  Interior panels are out to be upholstered.  A couple of small details need to be taken care of in the passenger compartment then I think I will mount the front suspension.  I also have to fabricate new tubes from the turbo to the intercooler and from the intercooler to the throttle body.  Still a lot of work to do.

DSC007291024x741.jpg
DSC007371024x715.jpg
DSC007321024x756.jpg
DSC007341024x703.jpg
Title: Re: Reinventing my TR6
Post by: rficalora on June 06, 2011, 11:16:34 PM
Great update Dale; looks like it's coming together nicely.
Title: Re: Reinventing my TR6
Post by: BlownMGB-V8 on June 08, 2011, 04:34:22 PM
That's fantastic Dale. I wish I was making progress on my roadster anywhere near as fast as you are getting along. Still, I'm keeping at it also. Can't wait to see it when you get done.

JB
Title: Re: Reinventing my TR6
Post by: MGBV8 on June 08, 2011, 10:22:58 PM
Thanks for the update pics, Dale.  We missed ya at Townsend!
Title: Re: Reinventing my TR6
Post by: britcars on June 11, 2011, 07:42:14 PM
Good to see the progress Dale.  I've been wondering how things were moving along with you and your car but don't think to visit the Triumph side very often. That is going to be one very nice ride!
Take care,
Phil O
New Brunswick
Title: Re: Reinventing my TR6
Post by: tr6turbo on July 04, 2011, 04:28:24 PM
A little more progress.

DSC00738.JPG
DSC00739.JPG
DSC007411024x768.jpg
DSC00743.JPG
Title: Re: Reinventing my TR6
Post by: Keith on July 05, 2011, 12:56:05 AM
I just found out about this over on the MG side of the house. Very nice, I'm looking forward to seeing how it all turns out. I've always felt that, aesthetically, the TR6 needed a few extra inches in body width but I have to say the car looks good with the extra wheelbase.

By the way, those wheels are the Enkei 92. They've just been put back into production.
Enkei Classic wheels (http://www.tirerack.com/wheels/enkei-classic-wheels.jsp)
Title: Re: Reinventing my TR6
Post by: tr6turbo on July 05, 2011, 05:31:42 PM
Keith,  Thanks for the info on the wheels.  I was wondering what I would do if I destroyed one.  I knew they were out of production at one time.  When I bought these wheels you could get custom offsets which these are.  I wonder if that is true now that they are back.  The wreck did not hurt the wheels.  I added the 2 inches to meet NHRA drag racing rules but I agree with you a little width would help the aesthetics.
Title: Re: Reinventing my TR6
Post by: Keith on July 05, 2011, 06:20:01 PM
I don't know if they come with custom offsets these days, looks like the only 5-bolt application currently listed is a 5x114.3 15x7 with a +38 offset. Hopefully that works for you - and it's a good thing you didn't hurt one!

I'm enjoying watching the car's rebirth, thanks for sharing.
Title: Re: Reinventing my TR6
Post by: MGBV8 on July 09, 2011, 08:58:29 AM
Dale,

They don't have your size. I don't believe there are any custom offerings at all. It's a very limited production return, primarily for the tuner market.

http://www.enkei.com/size_chart/ENKEI92.pdf

I looked at them real hard cause they are virtually the same as my American Racing wheels (although mine are a bit lighter).
Title: Re: Reinventing my TR6
Post by: jdevries on July 09, 2011, 08:29:19 PM
Dale, really like what you've done to the tr-6. What class are you trying to fit into with the wheel base stretch? Have you got any times and speeds that you wish to post? I think it's possible to make lots of power with the ford turbo four and there have been some articles in Hot Rod of people who have done just that. I think nine second times are easily within reach. John
Title: Re: Reinventing my TR6
Post by: tr6turbo on July 10, 2011, 09:16:04 PM
John,    I run bracket classes mostly.  I am not a points racer and I do as much test and tune as racing.  My best time was 10.76 at 128 MPH.  My goal is to keep it streetable and still run some auto cross so 9s are not my goal.  I know a guy from St Louis that has toched the 8s with a mustang that is streetable so it can be done.
Title: Re: Reinventing my TR6
Post by: jdevries on July 11, 2011, 09:44:21 PM
Dale, awesome, that hairdryer is one great equalizer. What are you using for a contoller for the injectors and the wastegate? Have you spent much on the internals to make it tough? It's got to be making 500+hp to run that good. I like the idea of being able to drive to the strip, run as hard as the trailered in cars and then drive it home, and still be able to go around a corner fast. Must really catch some of them by surprise. Plus you made it yourself. Gotta love it. John

Dale, found your pics and write up. Answers most questions. Nice job. John.
Title: Re: Reinventing my TR6
Post by: tr6turbo on July 31, 2011, 08:41:14 PM
She is on the ground and running.  My goal is to get the body panels on the car and get it out to the track less finish paint and interior.  It still needs more work before I can do that but it is getting close.  It will be an ugly duckling but at least I can get some enjoyment out of it before winter.  The plan is to finish it over the winter.

DSC00747800x600.jpg
DSC00748500x375.jpg
DSC00750600x450.jpg
DSC00751640x480.jpg
Title: Re: Reinventing my TR6
Post by: kstevusa on August 02, 2011, 08:41:06 AM
Congrats Dale,  your project has come a long ways in 13 months.  Seeing the  car  at ORP garage, I thought is was totaled.  Look fwd to seeing you in the future at the V8 meets.
SAFETY FASTER!
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 21, 2011, 11:25:15 AM
Went to the track to shake down the car.  It sure felt good to be able to make some passes.  If I had lights and everyting on it I could do this on the road.  Anyway I do have a couple of problems to work out.  It will only make half as much boost as it should and my wide band O2 is dead so I have to run the engine management in open loop.  Half boost means half as much fun so I need to fix that first.

DSC00753.JPG
DSC007541280x960.jpg
DSC007561280x960.jpg
DSC007551280x960.jpg
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 21, 2011, 11:51:52 AM
Does anyone think the car looks different with the 2 inch strech I did to the wheel base?  The second photo would show it if it is noticable to you.  The gray paint might be getting in the way.  Just curious about what you see.
Title: Re: Reinventing my TR6
Post by: BWA on August 21, 2011, 02:42:25 PM
I don't think it is noticeable.  When you get it all back together with new paint you will have to have it next to an unaltered one to notice and even then it may be difficult.  Keep up the good work!

Cheers

Byron
Title: Re: Reinventing my TR6
Post by: BlownMGB-V8 on August 21, 2011, 04:33:47 PM
Dale, I think it's fairly obvious if you are familiar with TR's. But I also think it looks very good, and muscular in a long-hood sort of way.

JB
Title: Re: Reinventing my TR6
Post by: tr6turbo on August 21, 2011, 05:29:29 PM
Jim, I notice it but not in a bad way.  I think this is one of those things where you know there is something but can't put your finger on it.
Title: Re: Reinventing my TR6
Post by: 74ls1tr6 on August 22, 2011, 09:44:53 AM
Great progress Dale.

I think it looks OK with the 2" added. It was for a good cause and reason.

 I bet that felt real good getting out on the track again. Congrats on your progress and not letting the passed stop you Dale.

Calvin
Title: Re: Reinventing my TR6
Post by: britcars on August 25, 2011, 07:24:17 PM
Looking good Dale! I'm sure it was a great feeling to be driving the car. Shouldn't be too much longer before you're on the road again.  
I think that the extra two inches is noticeable to me perhaps only because I'm aware of it.  Probably most people won't notice that it's had a bit of a stretch.
take care!
Phil Ossinger
New Brunswick
Title: Re: Reinventing my TR6
Post by: motek on August 31, 2011, 07:08:08 PM
I forgot about the stretch and didn't notice it. Once you pointed it out I remembered and saw it. I think if you had street wheels and rubber that filled the opening it would be less obvious.

George
Title: Re: Reinventing my TR6
Post by: MGBV8 on September 04, 2011, 09:09:16 PM
Paint it & park it next to Ted's.  Then, we can watch & see who notices. I think it is very subtle.
Title: Re: Reinventing my TR6
Post by: tr6turbo on October 26, 2011, 07:39:25 PM
Pictures of my easy lift off front end.

DSC00764640x480.jpg
DSC00763.JPG
DSC00765.JPG
DSC00766.JPG
Title: Re: Reinventing my TR6
Post by: 74ls1tr6 on October 26, 2011, 11:02:09 PM
Dale,

Very nice setup! Looks like some fat was taken off too?
Title: Re: Reinventing my TR6
Post by: tr6turbo on December 05, 2011, 07:32:20 PM
I want to make a fiberglass front bumper.  I need a steel bumper to use as a mold.  I have been looking for some time and have not found a cheap one.  Rust is no problem since it will be used as a mold only.  I would be interested in "renting" one that I would return when I am finished if anyone knows someone that wants to entertain that idea.  I need a early one before the rubber blocks were added.

Dale
Title: Re: Reinventing my TR6
Post by: jellison on January 09, 2012, 10:00:34 AM
Is that front "clip" all in steel?

Would it not make more sense to have glass fibre (the whole lot) front, top and bottom valance and wings? Could still all be built up as one clip.
Title: Re: Reinventing my TR6
Post by: tr6turbo on January 09, 2012, 12:39:02 PM
Yes it is all steel.  The hood will be fiberglass.  I wanted a working hood and I thought that if I also wanted a removable front clip going with steel would be more durable.  If I were to start over I might rethink that.

dale
Title: Re: Reinventing my TR6
Post by: Med72 on February 09, 2012, 09:38:48 PM
Hey Dale:

Good to see that you are getting the beast back on the road.  I notice from the photos that you have a 5 bolt wheels as opposed to the standard Triumph 4 bolt pattern.  What did you use to convert this?  I know the rear end is either a 8" or 9" so that is the Ford 5 bolt pattern but what did you use for the front?

Also, I plan to use a Ford 9" but still debating whether or not I will design a  new rear sub frame or do something similar to what you did.

What do you recommend?
Title: Re: Reinventing my TR6
Post by: tr6turbo on March 09, 2012, 06:01:24 PM
Here are a few pictures of the new interior.  The pictures are not very good.  The color is a light gray which is going to require a lot of cleaning I am afraid.  I still have a lot of paint work to do before the car will be finished.
IMG_2136.JPG

IMG_2137.JPG

IMG_2138.JPG

IMG_2139.JPG
Title: Re: Reinventing my TR6
Post by: MGBV8 on March 10, 2012, 09:28:19 AM
Yer gettin there, Dale!
Title: Re: Reinventing my TR6
Post by: 74ls1tr6 on March 13, 2012, 01:19:02 AM
Congrats on some more progress! Interior looks clean...
Title: Re: Reinventing my TR6
Post by: Capt'n Moorgone on March 18, 2012, 12:01:57 PM
Looks great Dale!Can't wait to see it in person.  Mike
Title: Re: Reinventing my TR6
Post by: tr6turbo on June 03, 2012, 06:08:14 PM
The interior, windows, seats,carpet, etc are now installed.  The doors are on and adjusted.  The dog house is painted and ready to set in place.  I idled the engine to get it good and hot so that I can retorque the head and look for leaks which I did find one minor one.  Things are looking good.

IMG_2201.JPG
IMG_2202.JPG
IMG_2205.JPG
IMG_2204.JPG
Title: Re: Reinventing my TR6
Post by: rficalora on June 03, 2012, 11:38:30 PM
It's looking good Dale.

Missed you in Palestine; are you planning to make it to Omaha next year?
Title: Re: Reinventing my TR6
Post by: MGBV8 on October 07, 2012, 04:21:06 PM
Paging Dale.

I hear "Stretch" is back together & on the road. We need a completed pic to finish this thread.  ;)
Title: Re: Reinventing my TR6
Post by: tr6turbo on October 08, 2012, 05:52:38 PM
I took a few but they did not turn out well.  I will try again.
Title: Re: Reinventing my TR6
Post by: tr6turbo on October 18, 2012, 07:57:20 PM
I have had the car back on the road and the dragstrip for about 3 months now.  I have been doing more drag racing then anything trying to get it back to where it was.  The last couple of times out it was running 10.9s.  Need to get another .1 out of it.  Here are a couple of pictures.
IMG_2243.JPG
IMG_2244.JPG
IMG_2249.JPG
IMG_2245.JPG
Title: Re: Reinventing my TR6
Post by: tr6turbo on October 18, 2012, 08:07:27 PM
Here are a couple of youtube links
http://www.youtube.com/watch?feature=player_detailpage&v=GYWV9Y_ZFJM
http://youtu.be/YZuaaFfngd8
Title: Re: Reinventing my TR6
Post by: BlownMGB-V8 on October 19, 2012, 08:16:17 AM
Better than new.

Jim
Title: Re: Reinventing my TR6
Post by: Dan B on October 19, 2012, 10:17:33 AM
The announce had "no idea what kind of car that is"
Title: Re: Reinventing my TR6
Post by: MGBV8 on October 19, 2012, 06:32:40 PM
Looks great Dale!

I guess that extra wheelbase helps keep the front wheels on the ground.  :)
Title: Re: Reinventing my TR6
Post by: dwtr6v8 on October 19, 2012, 07:12:48 PM
Looks red hot!