BritishV8 Forum

General Category => Triumph Sports Cars => Topic started by: KENATENCIO on June 08, 2010, 08:32:30 PM

Title: REAR END! for a 302 ford powered gt6
Post by: KENATENCIO on June 08, 2010, 08:32:30 PM
Hey guys,
 I was wondering where to start in terms of rear ends for gt6 project. I have it running and driving now just would like to see what the car can really do with but affraid of tearing my rear end up. so any help would be great!
Title: Re: REAR END! for a 302 ford powered gt6
Post by: dwtr6v8 on June 10, 2010, 07:56:03 AM
It's not all about fit, more so about ratio options,ring gear size and what's your HP/TRQ from the 302.

Check out this URL to get you thinking. (still fabrication needed)

Subaru R160 LSD

http://pages.prodigy.net/mikeross/00019.htm

How about a Nissan R200, 300z, I'm running one in my 5.0 TR6 and another LS1 Tr6 is running one. I would go with a short nose differential.

Maybe the Ford 8.8, Miata V8's have been using this swap for years.
Picture5.jpg
Image10.jpg

Some use the BMW E36 Differential

Picture6.jpg
Picture7.jpg