Print Page - can you tell the difference between a 3.5 rover sd1 and a 3.9sd1 just by looking

Title: can you tell the difference between a 3.5 rover sd1 and a 3.9sd1 just by looking
Post by: 09diane123 on April 06, 2010, 02:44:37 PM

help help help plz

Title: Re: can you tell the difference between a 3.5 rover sd1 and a 3.9sd1 just by looking
Post by: castlesid on April 06, 2010, 03:12:38 PM

Diane,

Heres a list of all the engine numbers.

All but the earliest P5/6 engines have the numbers next to the dip stick and start with the compression ratio 9.35/1 and then the engine number itself. you really want an engine with the 9.35 compression ratio.

http://www.v8forum.co.uk/engineno2.htm

The most common Range rover 3.9 engine numbers will start with 35D or 36D in the UK there are different numbers for TVR and Morgan versions but they tend to go for silly money.

There were no 3.9 SD1 engines.

Kevin.

Title: Re: can you tell the difference between a 3.5 rover sd1 and a 3.9sd1 just by looking
Post by: 09diane123 on April 06, 2010, 04:07:04 PM

thanx kevin great help i think the engine i bought was the 3.5 sd1 rover but cant find my paper work and guy doing conversion asked me to try finding out for sure do you know any uk numbers for 3.5 sd1 many thanks again

Title: Re: can you tell the difference between a 3.5 rover sd1 and a 3.9sd1 just by looking
Post by: 09diane123 on April 06, 2010, 04:08:39 PM

thanks kevin will check numbers in morning

BritishV8 Forum

General Category => MG Sports Cars => Topic started by: 09diane123 on April 06, 2010, 02:44:37 PM