BritishV8 Forum

General Category => MG Sports Cars => Topic started by: mgbrv8 on February 17, 2010, 01:56:26 PM

Title: LS1 MGB
Post by: mgbrv8 on February 17, 2010, 01:56:26 PM
Someone bet me to it. Looks like its going to be a good one.

Dave

http://www.ls1tech.com/forums/conversions-hybrids/1016526-ls1-into-1972-mgb-gt.html
Title: Re: LS1 MGB
Post by: MGBV8 on February 17, 2010, 05:42:41 PM
Sorry David.There are a couple of LS1 MGBs already on the road.

Some of his statements over there are not accurate (or truthful).

"Fast Cars Inc. makes a nice bolt-in suspension upgrade, but I chose to stay away from it. First, it's expensive. It would also require me to stick with the MG bolt pattern, heavy parts and narrow track. I built a complete front suspension based on Miata parts instead. Took longer, but I'll end up with a better handling car"
Title: Re: LS1 MGB
Post by: classic conversions on February 18, 2010, 07:30:28 PM
Yeap, Two of the LS 1 MGB;s have our 4 link rear suspension. 3 MGB's are in the oven, one is a GT in San Antonio Texas.
There is also a LT1 with all Corvette front and rear suspension, I just visited Jim In San Diego, car is great,
Title: Re: LS1 MGB
Post by: roverman on February 24, 2010, 01:49:24 PM
May want to look at Jim Stabe's, LS/MGB roadster, in this forum. Mega project and all first rate.  roverman.
Title: Re: LS1 MGB
Post by: 302V8 on February 24, 2010, 04:17:16 PM
Here's another one............ironically with a Fast Cars front crossmember.

I'll have more pictures of the install on my website in a week or two.

Plus, LS MGB motor mounts will be available in the very near future :)


Pete
DSC00915.JPG
Title: Re: LS1 MGB
Post by: Jim Stabe on February 24, 2010, 08:01:42 PM
Art

Minor correction - I'm using an LT1 not an LSx.
Title: Re: LS1 MGB
Post by: MGBV8 on February 24, 2010, 08:39:41 PM
Jim,

Swapping in an LS engine would be very minor considering what you are doing.  ;)
Title: Re: LS1 MGB
Post by: roverman on February 24, 2010, 10:18:18 PM
Jim, thanks for correction. Good to hear from you. Art.
Title: Re: LS1 MGB
Post by: Jim Stabe on February 25, 2010, 06:27:03 PM
Carl

I would have done an LS1 except that when I bought the engine (2001) it would have cost me as much for the engine alone as it did for the LT1 with the 6 speed. Besides, I think the LT1 looks cleaner than the LS when you put injector covers on with some nice valve covers.
Title: Re: LS1 MGB
Post by: castlesid on February 25, 2010, 06:41:26 PM
Pete,

That looks like it was meant to be there, and a nice compact top end, I suppose the headers are the trickiest bit.

Kevin.
Title: Re: LS1 MGB
Post by: theonlyiceman53 on March 06, 2010, 04:42:32 AM
Jim is doing a fantastic job on his LT1 MG!  Can't wait to see it on the road.  Great to see all the other fantastic looking British cars here! Really intended on stealing Jim's idea on my next build but didn't want to intrude on his creation.  Instead, went with the big is better theme.  Still a lot of work to do and the work that pays the bills is really intruding!  Haven't even touched it since Dec.  

http://www.cardomain.com/ride/3149161

Bill
Title: Re: LS1 MGB
Post by: MGBV8 on March 06, 2010, 10:39:45 AM
Bill,

I don't know if any one has mentioned, but your tires/wheels don't really fit....  ;)
Title: Re: LS1 MGB
Post by: Cobra Killer 72 on March 06, 2010, 08:43:51 PM
Looks great Bill...(quote)went with the big is better theme.

Dave
Title: Re: LS1 MGB
Post by: mgb260 on March 06, 2010, 10:51:01 PM
Do you guys know there are 175 MGB's on cardomain? Curtis ought to check it out and tell them about British V8.