Print Page - Longer flanged liners

Title: Longer flanged liners
Post by: roverman on October 26, 2009, 08:22:46 PM

Ok, so maybe I'm fixated on the aluminum Rover block, but it IS easy to weld. Anybody steer me towards Rover sleeves that are approx. 1" longer than standard. Maybe like for use in a large bore retrofit of a P 76 block? If so, I think I can, "bolt-on", Lotus heads. Definately will need 3.7" bore min. Thanks, roverman.

Title: Re: Longer flanged liners
Post by: hoffbug on October 26, 2009, 08:56:35 PM

LA sleeve or Darton will make you whatever you want.. for a price..

Title: Re: Longer flanged liners
Post by: castlesid on October 28, 2009, 06:26:50 AM

Art,

This will give you some idea whats available.

http://westwoodcylinderliners.co.uk/index.php/products/size/P100/

Kevin.

Title: Re: Longer flanged liners
Post by: roverman on October 28, 2009, 07:03:42 PM

Thanks Kevin. Any personal experience with this brand? Art.

Title: Re: Longer flanged liners
Post by: castlesid on October 28, 2009, 08:09:48 PM

Art,

No personal experience but have heard them recommended to others.

Kevin.

BritishV8 Forum

General Category => Engine, Transmission, & Rear Axle assy. => Topic started by: roverman on October 26, 2009, 08:22:46 PM