Good solid West Coast car (Nevada) - Clear Calif. title
Driveline installation started but not completed
3.5 Rover (disassembled), crank std.std., bore std., 3.9 F.I.
Heads: New big valves, seats & guides. Mild professional porting & polishing
New T-5 1352-251
New: bell housing, Hyd T.O. bearing, clutch, aluminum flywheel, mini starter, gaskets, hi volume oil pump, timing set,Total Seal rings, set of Prothane bushings
Jaguar XJ6 IRS (not installed, nor narrowed) - 3.54 gears
Complete parts list / info / more pics (209) 823-3057
originally asking: $4600 or $3300 w/o engine parts
now asking: $3200 or $2000 w/o engine (as of June 17, '08... this is an awesome deal! -Moderator.)
Located in Manteca, Calif.
mgbv8parts041C.JPG
mgbv8parts008.jpg
mgbv8parts011.jpg
mgbv8parts014.jpg
mgbv8parts026.jpg
mgbv8parts024.jpg
so you were building an "uncle fester" to go with the "aunt bee" robert??? send me a pm with your phone number will you so we can talk a little about it?? thanks, jim
Robeert - MGBGTV8,
Have you sold these parts already ?
Let me know what might still be available.
Phillip G
Roberet,
Have you sold these parts already ?
Please let me know what is available.
Phillip G
Hi Phillip,
It seems that Robert isn't checking this message board every day... BUT there's a nifty way for you to contact him from here. Underneath any of the messages that Robert has posted, there's a line of "Options" - and one of them that you can select (i.e. "click" on) should be "Reply via PM". If you use that option to send Robert a Private Message, the message board software will send a notice directly to Roberts e-mail.
Curtis
Phillip,
Did you try calling Robert?? If you have a problem calling I can. He is only about 45 minutes away from me. I drove down to his house and picked up his Miata seats.
Calvin
Phillip,
I left a message at his house for you about your interest for his parts this morning. Also sent him a PM last night.
Hope this can help you.
Calvin
I think Robert is on vacation, or on a big job, or out of town somewhere.
Robert,
What do you need for the aluminum flywheel
the clutch,
the mini starter
the high volume oil pump ?
Phillip G
Calvin,
Thank you.
No answer from Robert.
Best.
Phillip G
Folks, I've just been alerted that this jewel is still available, and that Robert and Susan are motivated to get it moved out.
(I amended the price in the original posting, above.)
At the new asking price, this clean Nevada/California bodyshell would be worth shipping almost anywhere.
p.s. Trying to picture what this car might look like someday? See: Robert and Susan's other MGB GT V8 (http://www.britishv8.org/MG/RobertMilner.htm) (16 photos)
any chance any of this stuff is still available?
Tim,
Have you tried calling the phone number on the first post 209-823-3057.
Leave a message of your interest, I'm sure Robert will get back with you.
It probably hasn't been sold, otherwise if it was it should be stated that it has been sold.
SOLD !