exhaust port covers?

[BOOTLEG]

Anybody know of a small plate with screw holes meant to cover and seal the V8 exhaust ports.  My engine is on the stand ready for a bath but I want to seal up at least the big holes and am too lazy to make them myself....

[BOOTLEG]

Last weekend I found myself sitiing in my shop with nothing urgent - rare.  I began to open drawers in my desk and found a section of vinyl flooring which caught my eye because it was both pliable and thick.  I took a new exhaust gasket and flipped over on the flooring 8 times-size worx.  I cut 1 for a template and spent time filing.   Used my sabre saw for the next 7.   Bolted one in place-WOW!  90 minutes of my time, check off my list "seal exhaust ports" for powerwash.  PROGRESS!

[MGBV8]

Most just use duct tape.

[Moderator]

I'm so glad I'm not the only one...

[BlownMGB-V8]

Duck tape is your friend.

Jim

[BOOTLEG]

Sure, I could have used Duct Tape but then what would do with the remaining 85 minutes?

[DiDueColpi]

Install the "B" cam.
It's mere presence should ward off any harmful effects ;-)
Cheers
Fred

[MGBV8]

Install the "B" cam.

Yes!

THE end all to fix everything!

[kstevusa]

I propose we donate the virtual  "ALMIGHT B CAM" in quantity to our U.S. Congress and provide instructions for install,  This would include specific instructions for "How to Degree"  and final installation into the ?   :-)      Problem Fixed!

[MGBV8]

Kelly,

 You are onto something! Maybe that is why it is designated the "B" cam.